The XC3S50-4CP132I is an FPGA (Field Programmable Gate Array) from Xilinx in the Spartan-3E series. It has the following main features:
• Xilinx Spartan-3E FPGA, featuring a XC3S50 device with 50K system gates.
• Supports a wide range of technologies including multipliers, FlexiIO, Xtreme MUX, QDR instantiations, etc. Optimized for small size, low power consumption and low cost designs.
• Programmable I/O: 144 pins in a 16x9mm CB324 package. Configurable as input, output, inout or bidirectional I/O. Supports 3-state outputs and low swing output buffers.
• Memory: 18Kb of embedded block RAM, 2 RAMB18s. User-defined memory sizes and read/write access support. Power-up state preservation of RAM contents.
• Logic Cells: 50,000 system gates. Supports sequential and combinational logic functions. Results in higher density and lower power consumption compared to other technologies.
• Multipliers: 18-bit by 18-bit integer multipliers available. Support integrated DSP and filter functions.
• PCI Support: Includes local buffer and PCI parallel detection support. Supports PCI target and master interfaces. Configuration using PCI bus.
• Clock Management: Supports a rich set of flexible and high-performance clocking resources. Includes output dividers, DCMs, PLLs, jitter filters, and clock switches.
• I/O Logic: Includes integrated flexible I/O standard cells such as Xtreme MUX which saves I/O power and improves pinouts. Registered outputs with edge-sensitive, level-sensitive and negative-level sensitive triggering options.
• Miscellaneous Logic: Supports Xtreme IO standards as well as FlexiIO, RapidIO, and Aurora multi-protocol support. Includes global and dedicated single-bit control signals, bus-holding registers, enable/disable modules, set/reset terms, trigger inputs and glitches.
• Low Power: Features such as output enable inverters, Extended power-down mode, dedicated power gates, reduced VCCINT levels (1.2V) help achieve lower power consumption. Power reporting and control available for different modules.
In summary, the XC3S50-4CP132I is a low cost, low power Spartan-3E FPGA from Xilinx. It is suitable for small size, cost sensitive and low power applications requiring basic logic operations and I/O interfacing. Please let me know if you need any further details.
XC4085XLA-08BG432C
Here is a summary of XC4085XLA-08BG432C FPGA in English:
The XC4085XLA-08BG432C is an FPGA from Xilinx in the Coolidge XC4000 series. It has the following key features:
• Xilinx Coolidge XC4000 family FPGA with 8,192 logic cells and 140 I/O pins.
• Supports a range of technologies including distributed RAM, multipliers, phase-locked loops, etc. Optimized for high speed and high-volume applications.
• Programmable I/O: 140 I/O pins in a84-pin PQFP package. Configurable as input, output, inout or bidirectional I/O. Supports 3-state outputs, registered outputs, level-sensitive and edge-triggered input registers.
• Logic Cells: 8,192 configurable logic cells. Each cell contains 4 inputs, 1 output, a carry-in, a carry-out, and a dedicated flip-flop with clear. Supports combinational and sequential logic operations.
• RAM: 64Kb of distributed RAM. RAM blocks can be cascaded together to increase memory size. Includes CRC generators and checkers. Supports different data widths, read/write access and power-saving features.
• Multipliers: 18-bit by 17-bit integer multipliers available as part of logic cells. For higher precision, multipliers can be cascaded together. Support integrated DSP functions including MACs.
• Clock Management: Includes clock dividers, PLLs, DCMs (Digital Clock Managers) and high speed serial clock dividers. Generate high-speed clocks, provide clock multiplication, divide clock frequencies, skew clock phases, etc.
• High-Speed I/O: Features include high-speed differential input receivers, high-speed differential outputs, and unidirectional high-speed serial transceivers. Support high-speed interfaces like PCI Express, Ethernet, etc.
• Low Power: Features such as output enable inverters, dedicated power gates, reduced VCCINT levels help achieve lower power consumption. Supports power optimization modes during high-speed operations.
• Miscellaneous Logic: Supports register sharing across clock domains, pulse width modulation, 4-bit binary adders, etc. Allows flexible and efficient utilization of logic resources.
In summary, the XC4085XLA-08BG432C is a high-speed and high-volume Coolidge XC4000 family FPGA from Xilinx. It is suitable for demanding applications requiring massively parallel processing, high-speed interfacing and efficient resource utilization. Please let me know if you need further details.
XC3195A-4PQ160C
Here is a summary of the XC3195A-4PQ160C FPGA in English:
The XC3195A-4PQ160C is a FPGA from Xilinx in the Virtex-E series. It has the following main features:
• Xilinx Virtex-E FPGA, featuring a XC3195A device with 192,000 system gates. Suitable for high performance applications.
• Programmable I/O: 160 pins in a PQFP160 package. Supports input, output, inout and bidirectional I/O configurations. Provides 3-state outputs, registered and simple outputs, bidirectional pins and input with positive/negative edge triggering or level sensitivity.
• Logic Cells: 192,000 configurable system gates. Each cell contains 4 inputs, 1 output, a carry-in and carry-out, and a dedicated flip-flop. Supports combinational and sequential logic functions.
• Block RAM: 576Kb of embedded RAM with variable width and power saving options. Supports different read/write modes, ram initialization, and ECC protection. Includes flexible block memories and FIFOs.
• Multipliers: 18-bit by 18-bit integer multipliers. Can be cascaded for higher precision multiplication. Supports integrated DSP functions like multiply-accumulation.
• Clock Management: On-chip PLLs, DCMs, VCOs provide high speed, high performance clocks. Clock dividers, MUXes, and LTCM control clock signals. Low jitter and glitch-free clock switching available.
• Advanced I/O: Includes high-speed serial receivers, high-speed outputs, I/O standards such as PCI Express, Gigabit Ethernet and LVDS. Supports high speed interfaces and protocols.
• High Performance: Supports features such as Virtex-E slices, carry chains, global clocks, registered outputs, M-RAM alternatives, etc. Enables higher clock frequencies and parallel processing.
• Embedded Features: Includes features such as JTAG and select map configuration, boundary-scan, logic analyzer, etc. Allows for device testing, configuration and analysis.
• Low Power: Includes features such as output enable control, dedicated power down components, reduced VCCINT levels, etc. Allows power savings during idle periods or high-performance operations.
• Miscellaneous Logic: Includes features such as pulse width modulation, binary adders, parity generators/checkers, etc. Offers flexible, dedicated and efficient utilization of logic resources.
In summary, the XC3195A-4PQ160C is a high-end Virtex-E series FPGA from Xilinx with excellent performance, densitiy and features for demanding applications. Please let me know if you require further information.
For ordering online on the store, you will need to have an online account. You can register on the site and place orders with credit card payment immediately.
If you are already a customer of ICBlackhole Asia, you can ask to be a Core Customer by contacting your respective Sales Representative or the online support team at [email protected]
For ordering online on the store, you will need to have an online account. You can register on the site and place orders with credit card payment immediately.
If you are having trouble logging in, click on "Forgot Password" and a new password will be sent to the email address you registered with. Please check your email and log in with the new password. If you are still unable to login, please contact one of our on line support team at [email protected]
Edit profile allows you to update your online account profile. Edit profile is located in the left menu on the dashboard under MyICBlackhole.
To search for product or information enter a part number, keyword, or technical attribute in the search box or browse for parts by selecting a category in the product tab on the main navigation. You can limit the search results to different areas, for example products or documents by clicking on the drop down menu in front of the search box. Easily find your favorite features, including price, inventory, minimum/multiple quantities, datasheets, availability, whether products are RoHS compliant, and more.
Uploading a BOM is a great idea when you want to find product information including price and availability on lots of parts at one time. Once you have uploaded your BOM you have the option to save and name your BOM or download your BOM worksheet.
Ordering on the ICBlackhole Asia Online Store is quick and easy. As soon as you have placed all items you want to purchase in the shopping cart, click the “Checkout” button in the shopping cart. Once you have received the shipment notice, no cancellation is allowed.
You can create a new shopping cart by clicking on the "Buy Now" button or selecting "Add to Cart." To access an existing cart, click on the shopping cart link located at the top of the page in the header. If you would like to save a cart, select "Add to BOM." Existing shopping carts or BOMs will be updated with any new price changes upon logging in.
Please not that you need to be registered and signed in to the store to place an order.
Please provide the address where the goods will be shipped to. For credit card orders, billing and shipping address country needs to be the same.
No Handling Charges will be applied to web orders. Freight charges apply during checkout process for credit card orders, on all orders placed with a terms account, freight charges will apply as per the terms account conditions. Customers may elect to Ship Complete by selecting, "Ship the entire order when all items are available."
Credit card orders will be shipped by DHL via standard shipment.
We accept Visa, MasterCard, Alipay and Unionpay. If you would like to use your ICBlackhole Asia terms account online, please contact your sales representative to become a sponsored user. If you do not know your sales representative, please contact the online support team at [email protected]
Customers placing orders online will receive two types of email notifications. The website will send a notification that your order has been received. Once the web order has shipped, a Shipping Notification will be sent out. Any parts on your order that did not ship will generate a separate Shipping Notification upon shipment.
To obtain order status on orders placed on the web, you must be a registered customer and signed in to the website.
Please note that there may be some delay in displaying order status on international orders during the Export Compliance review process.
To track packages or obtain a waybill number navigate to the Orders section of the Dashboard under My ICBlackhole. If the order was shipped via DHL click the waybill number in order to view the delivery status of your order via the DHL website. Please note, that it may take a while until the tracking information will be available online.
